这是一个创建于 894 天前的主题，其中的信息可能已经有所发展或是发生改变。
这个是配置文件，寻求 WAN 口端口映射配置，设置了但是不起效果，看了教程还是迷糊
[admin@MikroTik] > / export
jul/18/2022 11:38:23 by RouterOS 6.49.6
software id = F9KQ-H96D
model = CCR1016-12G
serial number = 7233068BA78A
/interface bridge
add name=bridge1
/interface ethernet
set [ find default-name=ether1 ] name=ether1-WAN
set [ find default-name=ether2 ] name=ether2-WAN2
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool0 ranges=192.168.44.2-192.168.44.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether12
add bridge=bridge1 interface=ether10
add bridge=bridge1 interface=ether9
add bridge=bridge1 interface=ether11
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=192.168.44.1/24 interface=bridge1 network=192.168.44.0
add address=192.168.23.74/24 interface=ether1-WAN network=192.168.23.0
add address=10.120.120.90/24 interface=ether2-WAN2 network=10.120.120.0
/ip dhcp-server network
add address=192.168.44.0/24 dns-server=223.5.5.5 gateway=192.168.44.1
/ip dns
set servers=223.5.5.5
/ip firewall mangle
add action=mark-routing chain=prerouting new-routing-mark=mail passthrough=no
src-address=192.168.44.200
/ip firewall nat
add action=masquerade chain=srcnat connection-limit=0,32 out-interface=!bridge1
add action=dst-nat chain=dstnat dst-port=9999 in-interface=ether2-WAN2 log=yes
protocol=tcp to-addresses=192.168.44.253 to-ports=23
add action=dst-nat chain=dstnat dst-port=9998 in-interface=ether1-WAN protocol=
tcp to-addresses=192.168.44.200 to-ports=80
add action=dst-nat chain=dstnat connection-limit=0,32 dst-limit=
0,5,dst-address/1m40s dst-port=9997 in-interface=ether1-WAN limit=
0,5:packet protocol=tcp to-addresses=192.168.44.200 to-ports=23
add action=dst-nat chain=dstnat dst-port=10000 in-interface=ether2-WAN2
protocol=tcp to-addresses=192.168.44.253 to-ports=4430
/ip route
add check-gateway=ping distance=1 gateway=192.168.23.254 routing-mark=mail
add check-gateway=ping distance=1 gateway=10.120.120.1
/system clock
 |
1
neroxps 2022-07-18 17:18:42 +08:00
|
|
2
neroxps 2022-07-19 10:34:18 +08:00
感觉还有一个方案，把 interface list 里面把拨号端口加到 WAN list 里，然后配 in interface list 是 WAN 。匹配则走 dnat 应该也可以。
这样 nat loopback 不需要知道 wan-ip 是多少。也不需要脚本更新 wan-ip 列表。    |
Select Language